Soft Orthotic & Prosthetic Products | Delivery Available
Crepe
Crepe is primarily used in outside modifications and in diabetic/arthritic protection for insensitivity and hypersensitivity.
Durometer: 55 Shore A
Molding Temperature: 275º - 300º F for 4-5 minutes
Grindable: Yes

EFM
EFM™, which stands for Extra Firm Material is a 70 durometer, heat moldable EVA. It is grindable, and is the highest source of rigidity for orthoses, short of plastic. Use EFM™ for the bottom-most, arch filler of foot orthoses. It works equally well as a mid-sole or split-sole wedge.
Durometer: 75 Shore A
Molding Temperature: 275°-300° F 4-5 min.
Grindable: YES
Available Colors: Black

Laminates
Material Laminates offer some distinct advantages over single layer materials. A characteristic, which is poor in one material, may be offset by the same characteristic which is strong in another material. Laminating two such materials together, or otherwise using them in conjunction, produces a better functioning material. Materials used in this manner possess all of the good qualities and reduce the weaker qualities of its’ components.
Bi-Laminates:
1/8" P-Cell + 1/16" Urethane
1/8" P-Cell + 1/8" Urethane
1/4" P-Cell + 1/8" Urethane
1/8" Plastazote + 1/16" Urethane
1/8" Plastazote + 1/8" Urethane
1/4" Plastazote + 1/8" Urethane
1/8" P-Cell + 1/4 Blue Puff
Tri-Laminates
1/8" P-Cell + 1/16" Urethane + 1/8" Blue Puff
1/8" P-Cell + 1/16" Urethane + 1/4" Blue Puff
1/4" P-Cell + 1/16" Urethane + 1/8" Blue Puff
1/8" P-Cell + 1/8" Urethane + 1/8" Blue Puff
1/8" Plastazote + 1/16" Urethane + 1/8" Blue Puff
1/8" Plastazote + 1/16" Urethane + 1/4" Blue Puff
1/4" Plastazote + 1/16" Urethane + 1/8" Blue Puff
1/8" Plastazote + 1/8" Urethane + 1/8" Blue Puff
1/16" Pink Puff + 1/16" Urethane + 1/8" Pink Puff
1/16" BBA Puff* + 1/16" Urethane + 1/8" BBA Puff
1/16" Blue Puff + 1/16" Urethane + 1/8" Blue Puff
1/16" White Puff + 1/16" Urethane + 1/8" White Puff
1/8" Blue Puff + 1/8" EFM + 1/8" Blue Puff



P-Cell
P-Cell® is a closed cell EVA foam that is less abrasive than similar products, such as Plastazote® A less abrasive insole can help protect the diabetic. The more abrasive the surface of the material, the more likely the skin will become irritated, which may result in blistering or ulcerations. P-Cell® is a smooth, closed cell product which does not hurt the skin.
Durometer: 20-25 Shore A
Forming Temperature: 225°-275° F 2-3 min.
Grindable: YES
Available Colors: Pink & Black

Plastazote
Plastazote® is a closed cell polyethylene that is used in top covers, AFO interfaces, as a base layer in foot orthotics, light posting, as a light weight base layer in orthotics, and for elevations.
Durometer: 20 Shore A (Medium LD45), 35 Shore A (Firm LD70) and 65 Shore A (Rigid HD115)
Forming Temperature:
225º-275º F 2-3 min. (20 dur)
250º-275º F 2-3 min. (35 dur)
275º-300º F 2-3 min. (65 dur)
Grindable Yes
Available Colors: Pink, White, Black, Red, Blue, & Yellow

Puff/EVA
Microcel Puff® (EVA, Cloud, P-Lite) is an Ethylene Vinyl Acetate (EVA) foam. EVA is a wonderful shock absorber that is heat moldable and has excellent shape retention. It is used for top covers, in foot orthotics, body jacket linings, padding, scaphoid reinforcement, and prosthetic inner linings.
Durometer: 25 Shore A, 35 Shore A, 55 Shore A, 65 Shore A, & 75 Shore A
Molding Temperature: 250° - 275° F 2-3 min.(25 dur & 35 dur)
275° - 300° F 4-5 min. (55 dur, 65 dur & 75 dur)
Grindable: YES
Available Colors: Light Blue, Blue, Pink, White, Black, Forest Green, Green, Purple, Yellow, Aqua Blue/Black/Aqua, Yellow/Red/Blue/Green, Green/Purple/White, Pink/Purple/White, Red, Brown, Rust, and Sand Camouflage


Spenco
Spenco® is best for shock absorption and reducing friction while improving overall foot comfort. Popular for athletics, but great in all shoes.
Available sizes/colors: 1/16x42x48 Blue & Black; 5/32x42x48 Blue

Urethane
Cellular Urethane, also known as PPT and Poron™, is a high-density, open cell foam that offers excellent compression abilities and will retain its' shape after repeated stress. Its primary uses are for central core of foot orthotics, plugs, and reliefs.
Durometer: 15 Shore A
Molding Temperature: No
Grindable: YES
Available Colors: Blue, Patina & Tan
Volara
Volara®, also known as Aliplast, is a soft density, close cell, cross-linked polyethylene foam padding material. It is used as a lining for body jackets and lower extremity orthoses, including cushioning for orthotics.
Durometer: 23 Shore A
Sizes: 1/16, 1/8, 3/16, & 1/4
Molding Temperature: 300° F 3 min.
Grindable: Yes
Available Colors: White & Black
Volara®10 is effective for foot orthotics and splint shells.
Size: 1/8
Available Colors: White
Holding Temperature: 250º - 325º
Density: 10 pounds/cubic foot
Service temperature: -110º to +200º
Volara® XPE is the firmest grade of Aliplast and is suitable for posting orthoses.
Sizes: 1/4
Durometer: 70 shore A
Available Colors: Ivory/off White
Volara® 12 A
Sizes: 1/8
Available Colors:


X-Static LineD Materials
X-Static® lined materials have a natural layer of pure silver permanently bonded to them. Because silver is the world’s most effective anti-microbial and thermally conductive element, X-Static® delivers unparalleled anti-odor, thermodynamic and anti-microbial properties. Materials lined with X-Static® are perfect for custom insoles, crow walkers, back braces, prosthetics, or anywhere the body comes into contact with an orthopedic product.
Materials adhered to: Impression Puff, Poron/Urathane and Neoprene.
Sizes: 1/16 & 1/8
